Spin Pull to Stroke Pneumatic / Hydraulic Tool
The P 330 tool installs the RIVNUT® and RIVSTUD® by pull to stroke distance control. The stroke of the tool is set to install the fastener in a specific material thickness.   Your choice of TPI and diameter can be ordered.

Installation Sequence

 Press the RIVNUT® or RIVSTUD® fastener
ds against the tool mandrel for automatic
spin on.
 Insert the fastener into the hole in the parent
material and pull the lower trigger installing
the fastener.
 Pull the upper reverse trigger completing the
installation.

Features
 Rocker Style forward and reverse trigger
 Installs 10 to 15 pieces per minute
 Balanced for operator comfort
 Installs the widest range of RIVNUT® and
RIVSTUD® fasteners
 Weight: 6.2 lbs. (2.8kg)
 Max. Stroke: .275 in. (7,0mm)
 Max. Pull Force: 4,700 lbs. (21.0 kN)
 75 PSI (5.2 BAR) of clean dry air required for
operation